Our review and the best deals on Graco Booster Seats
graco_booster_seat1.jpggraco_booster_seat2.jpggraco_booster_seat3.jpg

How to Install a Graco Booster Seat

Graco booster seats are products designed to help secure a child in the back seat of a car or van. They are similar in appearance to baby seats, but they use one of the vehicle’s own shoulder-and-lap safety straps instead of a built-in harness system. As such, they are well-suited to children who are too large for a baby seat, but not quite big enough for the shoulder-and-lap strap to secure them safely. Installing a Graco booster seat is fairly straightforward, but you must take care to ensure that the safety strap is properly positioned when in use.

Positioning

Step 1
Place the booster seat in the vehicle’s back seat, next to one of the shoulder-and-lap safety straps. If desired, remove the back support by pushing it forward until it disengages from the booster seat. Once you have removed the support, insert the shoulder-belt positioning strap through the seat’s rear guide and use the attached loop to secure it in place.
Step 2
Push the booster seat against the back seat as far as possible. Place your child into the booster seat, then pull the safety strap over the seat and child.

Step 3
Pass the sections of the strap underneath the arm rests, then insert the end of the strap into the safety buckle.

With Back Support

Step 1
Position the shoulder strap over your child’s shoulder. Slide the shoulder strap into the guide on the seat’s headrest.

Step 2
Ask your child to lean forward, then grip the handle located on the rear of the back support. Push the red adjustment button to disengage the back support lock.

Step 3
Position the bottom edge of the headrest next to the child’s shoulders. Release the red adjustment button to engage the back support lock.

Without Back Support

Step 1
Grip the clip attached to the shoulder-belt positioning strap. Lift the clip up to the top of the child’s shoulders.

Step 2
Slide one edge of the shoulder strap through the gap in the clip. Pull the strap through until it is completely inside the clip.

Step 3
Tug on the end of the shoulder-belt positioning strap until the clip that is holding the shoulder strap is snug against the child’s shoulders.

Click here to check today’s prices at Amazon.com

Incoming search terms:

  • booster seats in van
  • how to attach the shoulder straps on graco car seats
  • how to insert graco booster
  • how to put back of a graco booster seat
  • how to put graco booster
  • how to put the back on a graco booster seat
  • how to strap in booster seat
  • www gracobooster
, , , , , , ,